Our handsfree Galvin CliniMix® Lead Safe™ Wall Mounted Thermostatic Progressive Basin Mixer with Proximity Sensor. This new design is suitable for medical or nursing procedures, providing state-of-the-art features to comply with the latest healthcare requirements. The CliniMix® Lead Safe™ Thermostatic Progressive Mixing Valve with proximity sensor will activate when the user's hands are in the set detection area, and it will operate for the period that the user's hands are in that area. Suitable for high and low pressure systems it can be set to deliver a thermostatically controlled water temperature of 48ºC maximum. Robust and reliable, our CliniMix® Lead Safe™ Wall Mounted Thermostatic Progressive Basin Mixer is water conserving and cost-effective.
Features
Technical Information
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Our Lead Safe™ product range is compliant with the Lead Free Requirements of the NCC 2022 Vol. Three, Clause A5G4(2) and NSF/ANSI 372.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
