Skip to main content

Video

Specification Data Sheet

This new Australian Made design may be used in shower applications and, provides state of the art features to comply with healthcare requirements.

The GalvinCare® anti-ligature handle operates on/off temperature controls for straight forward operation.

Suitable for high and low pressure systems, it can set to deliver a thermostatically controlled water temperature of 48ºC maximum.

Features

  • Enables water to be mixed closer to the point of discharge. This minimises warm water becoming stagnant which can provide an ideal condition for Legionella bacteria to grow.
  • Smooth internal and external components to decrease dirt build up.
  • Water flow always starts from cold for safe usage.
  • Fast and easy to clean.
  • All servicing and commissioning can be done without removing the device. Easy to access isolators helps to minimise the time of commissioning and maintenance.
  • Designed to provide stable mixed temperature and rapid shut down in the event of cold or hot water supply failure.

Technical Information

  • Inlet: 1/2" BSP - Female
  • Outlet: 1/2" BSP - Female
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (bar): 0.5 Min to 5.0 Max
  • Hot Temperature Supply Range (°C): 55 Min - 65 Max
  • Cold Temperature Supply Range (°C): 5 Min - 20 Max
  • Minimum Temperature Differential (between supply and the outlet temperature) (°C): 10
  • Adjustable Temperature Range (°C): 35 – 43
  • Permitted Supply Pressure Variation: 10:1
  • Factory Set Thermostatic Temperature (°C): 41
  • Minimum Flow Rate for Stable Outlet Temp. (LPM): 6
  • Construction: DZR Brass
  • Finish: Chrome

Optional Extras

  • WM-PMSKIT CliniMix® Inwall Shower Disinfection Plug Kit

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.

In the absence of a legal or industry definition of anti-ligature or ligature resistant products, when we use these terms, we are referring to products that are designed and manufactured with the intention of reducing the risk of ligature attachment to the product(s). Galvin Engineering Pty Ltd will always endeavour to design and test our anti-ligature product(s) to reduce the risk of product ligature attachment that may result in serious injury or death. Whilst all reasonable measures are taken at the time of design, the anti-ligature design of the products are not intended to and will not:
a. Replace protective measures that need to be taken in the specific circumstances of usage;
b. Substitute the need for supervision of those who may be at risk;
c. Protect and or prevent those at risk against any self-harm instances that may occur when installed; and
d. Protect and or prevent injury when the risks where unknown to us at the time of the design of the product(s).
Galvin Engineering Pty Ltd does not offer and does not represent or warrant that any product(s) for sale are ligature-free. Therefore, Galvin Engineering will not be liable for any claims, loss, or damages arising from ligature attachment on our products. It is the purchaser's responsibility to ensure that products purchased and installed are suitable for the environments in which they are installed, and suitable supervision and protective measures are in place to protect those at risk.