Skip to main content

Specification Data Sheet

New state of the art lead free Galvin CliniMix® thermostatic progressive mixer with anti-ligature handle is specifically designed for mental health and health care facilities featuring an easy to operate temperature control and option to be set to a thermostatically controlled temperature of 48°C maximum. Suitable for high and low pressure systems.

Designed to allow for an electronic piezo activation button fitted, and once activated, flow and temperature will commence where it was last set at. Temperature can be adjusted via the handle if needed.

Note: This product does not include activation button or electronic system required to operate shower. Please contact our specialist sales team for activation, electronic controller and valve options suitable for your environment. 

Features

  • Unique thermal disinfection bypass feature  (kit sold separately)
  • Reduces risk of Legionella growth by mixing water close to point of discharge and minimising stagnant warm water
  • Maximum temperature limiter fitted for protection against accidental scalding
  • Water flow always start from cold for safe usage
  • Clean smooth lines which facilitates fast and easy cleaning and combines well with our current ranges of healthcare taps 
  • All servicing and commissioning can be done without removing device. Easy to access isolators help minimise time of commissioning and maintenance.
  • Designed to provide stable mixed temperature and rapid shut down in event of cold or hot water supply failure
  • Manufactured using Lead Free DZR Brass with less than 0.25% lead content

Technical Information

  • WaterMark: AS 4032.4 Lic. WMKA21989
  • Inlet: 1/2" BSP - Female 
  • Outlet: 1/2" BSP - Female
  • Headwork: Thermostatic Mixing Valve (TMV)
  • Working Pressure Range (kPa): 20 Min - 500 Max
  • Working Temperature Range (°C): 5 Min - 85 Max  
  • Factory Set Thermostatic Temp (°C): 41
  • Maximium Outlet Pressure (kPa): 500
  • Permitted Supply Pressure Variation: 10:1
  • Minimum Temperature Differential (between supply and the outlet temperature) (°C): 10°C
  • Minimum Flow Rate for Stable Outlet Temperature: 6 LPM
  • Maximum Thermostatic Temperature (°C): 48
  • Construction: Lead Free DZR Brass
  • Finish: Chrome

Spare Parts

  • 100.90.70.20 CliniMix® BS Lead Safe™ Thermostatic Cartridge Assembly for Progressive Mixer
  • 100.90.72.20 CliniMix® Lead Safe™ Progressive Shower Non Return Valve & Strainer Assembly (Pair)

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.

Our Lead Safe™ product range is compliant with the Lead Free Requirements of the NCC 2022 Vol. Three, Clause A5G4(2) and NSF/ANSI 372.