Our Australian Made Galvin CliniMix^® range of thermostatic mixing valves (TMVs) is designed to protect the most vulnerable from scalding or cold water shock by providing tempered water to the desired outlets that comply with the relevant Australian Standards.

The CliniMix^® Emergency Shower Thermostatic Mixing Valve is designed to be paired with Safety Showers and, with limitations, Eye/Face wash units. In addition to these instructions, the valve must be installed subject to the requirements of the relevant regulatory authorities.

Suitable for health and general applications.

Features

• Ensures rapid termination of mixed outlet flow if there is a failure in cold or hot water supply and allows for continuous cold water flow through bypass in event of hot water failure, guaranteeing an uninterrupted supply for emergency situations.
• Ensures high stability of mixed water temperature even under varying inlet conditions
• Easy in-situ servicing
• Suitable for installation into AS 3500 compliant systems with low hot water temperature (55°C)
• Tamper resistant temperature adjustment mechanism

Technical Information

• Factory Set Outlet Temperature (˚C): 36 ±2
• Adjustable Outlet Temperature Range (˚C): Full cold Min - 37.8 Max
• Cold Supply Temperature (˚C): 5 Min - 25 Max
• Hot Supply Temperature (˚C): 55 Min - 85 Max
• Hot to Mix Temp Differential (˚C) at outlet temperature greater than 33C˚: 15 Min
• Minimum Flow Rate to Ensure Stable Operation (L/min) : Min 15
• Factory Set Temperature Flow Rate Maximum (LPM): 112 @ 210kPa
• Cold Water Bypass Flow Rate Maximum (LPM): 115 @ 210 kPa
• Permitted Supply Pressure Variation (exceeding this variation may result in the activation of the cold water bypass; kPa) : 80 D
• Hot and Cold Inlet Pressures (kPa): 1000 Max
• Inlet size: 1" BSP Female
• Outlet size: 1" BSP Female

Notes:
1. Notwithstanding the above, compliance with AS3500 must be maintained.
2. Galvin Engineering continually strive to improve their products. Specifications may change without notice.