Skip to main content

Specification Data Sheet

Avoiding hand contact with tapware helps reduce the risk of cross contamination, which is particularly important in food preparation and processing plants. The Ezy-Push® foot valve is perfect for handsfree operation and is constructed from polished chrome-plated brass and is easily floor-mounted. It has a self-closing function with a simple 15mm BSP female inlet and female outlet.

Features

  • Kit includes: Heavy duty vandal resistant 60° foot operated valve, isolating valves, flow regulator, fixed basin spout and flexible hose
  • Heavy duty vandal resistant push activated pedal and mounting plate
  • Finished in bright chrome plate
  • Handsfree self-closing valve
  • Constructed from (DR) Brass
  • Water and energy saving

Technical Information

  • WELS: 6 Star Rating (5.5L/min)
  • Nominal Flow Rate (LPM): 5.4
  • WaterMark: AS/NZS 3718 Lic. WMKA0034
  • Recommended Pressure: 300kPa
  • Recommended Temperature: 70°C Max
  • Minimum Pressure: 100kPa
  • Maximum Pressure: 500kPa
  • Use of Strainers recommended
  • Construction: Brass
  • Finish: Chrome

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.