Skip to main content

Specification Data Sheet

The Galvin Flowmatic® Stainless Steel Plate with Concealed 24V AC Wall Sensor to suit Enw. is an aesthetically pleasing, single temperature water control unit, which can be used in hand basins, sinks application to initiate a controlled flow of water. 

The new Smart Bluetooth sensor provides a selection of automatic hygiene flush options to meet your Water Quality Risk Management (WQRMP) plan dead leg flushing requirements. 

Features 

  • Sensor face is designed to be mounted flush into the wall to minimise the growth of dirt or bacteria, combined with the sensor eye and screws that are supplied
  • Single temperature water control
  • Multiple time cycle option is able to be adjusted on site which provides the facility manager the flexibility of adjusting to suit user requirements
  • Sensor circuit boards are supplied standard with a lacquer finish to limit the damage that may be caused by moisture
  • Built in capacitors and easy fit electrical filters help suppress external noise and provide a continuous, reliable delivery of water
  • 1.5mm thick stainless steel face plate with hand activation sensor. It is designed to be mounted flush into the wall
  • Controller is pre-programmed and ready to use. The solenoid will open for a specific time once the sensor will detect hands movement

Technical Information

  • Sensor Activation: Wave-On and Wave-Off
  • Finish: Brushed Stainless Steel 

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.