The GalvinAssist® ClevaCare® Shower System for assisted showering was developed to reduce mental and physical stress for patients and their caregivers allowing for a safe and pleasant experience.
The clever Australian made ClevaCare® shower arm is an extendable and retractable spring arm with a pivot joint, allowing the caregiver to easily maneuver around the patient achieving a more thorough clean thanks to the greater reach. At the same time, it offers the patient a more comfortable and dignified experience while meeting strict occupational health and safety requirements.
Using the ClevaCare® shower arm not only minimizes the risk of infection or cross-contamination from dragging the hose on the floor or across a patient’s body but also eliminates the distress for people who dislike foreign objects touching their skin.
When considering the shower cubicle options in care facilities bathrooms provisions for assistance must be considered where someone is incapable of performing the cleaning task unaided.
Features
Technical Information
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
