Skip to main content

Specification Data Sheet

An integral consideration when designing bathrooms and shower cubicles for care facilities is to meet the needs of patients and caregivers alike. They need to be easy to use irrespective if they are used for independent or assisted showering. The specifically designed GalvinAssist® healthcare range is the preferred choice for a safe and dignified showering experience.

Features

  • Grade 304 stainless steel grab rail with satin finish
  • Hygienic health safe flange covers
  • ABS slide cradle fastened and tensioned to the grab rail for handset support and movement
  • Strong and stylish white ABS handpiece
  • PVC reinforced smooth and flexible white spiral hose
  • Chrome on brass wall outlet elbow which features 9 L/min Flow.
  • Interchangeable spigot and separate licensed dual check/non-return valves to prevent back-siphonage
  • AS 1428.1 accessible compliant

Technical Information

  • WELS: 5 Star Rating (6.0L/min)
  • Nominal Flow Rate (LPM): 5.62
  • WaterMark: AS/NZS 3662 Lic. WMK26191
  • Inlet: 1/2" BSP
  • Outlet: ABS Plastic Shower Head
  • Headwork: N/A
  • Working Pressure Range (KPa): 100 min - 500 max
  • Working Temperature Range (°C): 5 min - 70 max
  • Construction: Brass

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.