GalvinSafe® Emergency Drench Shower for horizontal or vertical installation shall include the AXION® MSR ABS hydrodynamic design showerhead with 75.7lpm flow control, type 316 stay-open ball valve equipped with stainless steel ball and stem, stainless steel pull rod with triangular handle, universal sign, and 1" BSPT(M) supply.
Product complies with AS 4775.
>> See here for important considerations for Specification and Installation
>> Learn more about how the GalvinSafe® Haws® AXION® MSR safety equipment works
QUALITY CONTROL
Valve assembly is pre-built for reduced installation time and an added peace of mind for the installer.
VALVES
Type 316 stainless steel stay-open ball valve is designed so the full flow of water remains on with the simple tug of the triangular pull rod. Unit also comes equipped with a stainless steel ball and stem to provide added protection against corrosion and breakage.
UNIVERSAL MOUNTING
Designed for horizontal or vertical installation, this drench shower is mounted sturdily from any wall or ceiling.
SHOWERHEAD
AXION® MSR ABS showerhead uses a hydrodynamic design to give equal distribution of water throughout the entire footprint of flow.
SAFETY
203x273mm universal emergency sign makes the unit easily detected in an emergency. Test card to record weekly checks helps maintain the unit s best working quality.
PULL ROD
711mm stainless steel triangular pull rod provides a reachable height for users while maintaining its durable design.
We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.
Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.
Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.
While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.
Our Lead Safe™ product range is compliant with the Lead Free Requirements of the NCC 2022 Vol. Three, Clause A5G4(2) and NSF/ANSI 372.
Click the buttons below to read Galvin Engineering's Terms and Conditions.
 |
 |
 |
