Skip to main content

Specification Data Sheet

The Ifo Spira Toilet combines ergonomic elevated height for enhanced comfort with a sleek, contemporary design that fits any bathroom decor. Its efficient S Trap configuration and innovative, water-efficient flush system ensure superior hygiene and convenience.

Features

  • Rimless flush
  • Free standing toilet suite, suitable for installation into a corner
  • Provides 100% consistency and reliability as combined WC and back support - no additional backrest needed to meet requirements of AS1428.1 as an approved AS1428.1:2021 Performance Based Solution
  • 460mm increased height toilet pan (excluding toilet seat)
  • Allows for undisturbed coving seal
  • Includes standard flush button
  • Pan load rated to 400 kg
  • Fully glazed on back and inside rim to avoid bacteria growth
  • Toilet pan fixed to the floor using 316 stainless steel pan screws (supplied) or fixing bracket (available separately)

Technical Information

  • WaterMark: AS 1172.1 Lic. 040187 & AS 1172.2 Lic. 004000
  • WELS: 4 Star Rating (3.3L/min)
  • Full Flush (LPM): 4.4
  • Half Flush (LPM): 3.1
  • Nominal Flow Rate (LPM): 3.3

Note: Toilet seat not included.
Note: For WELS Information, refer to Product Code 6261.

Optional Extras

  • 502.616.21.1 Ifo Spira Actuator Button, Dual Flush, Raised, Suits Fresh Stick - Chrome
  • 94690 Ifo Fresh Sticks, Suits Spira/Sign Toilets (5 Pcs) - Blue

Spare Parts

  • Z90710 Ifo Spira Ceramic Shroud Cover
  • Z98949 Ifo Cistern Fixing Screw & Clip (Pair)
  • Z91960 Ifo Cistern Key with Hex & T25 Torx
  • 243.801.00.1 Ifo Inlet Valve Arm & Seal
  • Z97230 Ifo Spira Cistern Gasket Foam Seal
  • Z98512 Ifo Spira Flush Water Distributer
  • Z97202 Ifo Spira Inner Cistern Tank with Seal

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.