Skip to main content

Specification Data Sheet

Stainless Steel Strainer Basket 100 Nom  

Suitable for floor waste applications, roof outlets, drains and more

This product is compatible with

  • DEB4S06RX Bucket Floor Trap Combo - DI 100PVC with SS Round HeelGrate® 150 & SS Strainer
  • DEB4S06SX Bucket Floor Trap Combo - DI 100PVC with SS Square Grate 150 & SS Strainer
  • DI4M06SX Industrial Floor Waste Combo - SS Square Grate 150x100 PVC/HDPE/CU & SS Dual Strainers
  • DI4S06SX Industrial Floor Waste Combo - SS Square Grate 150X100 PVC/HDPE/CU & SS Strainer
  • DI4M08SX Industrial Floor Waste Combo - SS Square Grate 200X100 PVC/HDPE/CU & SS Dual Strainers
  • DEB4S06VX Bucket Floor Trap Combo - DI 100PVC with SS Vinyl Grate 150 & SS Strainer
  • DI4M06RX Industrial Floor Waste Combo - SS Round Grate 150x100 PVC/HDPE/CU & SS Dual Strainers
  • DI4S06RX Industrial Floor Waste Combo - SS Round Grate 150x100 PVC/HDPE/CU & SS Strainer
  • DI4M06VX Industrial Floor Waste Combo - SS Vinyl Grate 150X100 PVC/HDPE /CU & SS Dual Strainers
  • DI4S06VX Industrial Floor Waste Combo - SS Vinyl Grate 150X100PVC HDPE/CU & Stainless Steel Strainer

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.